Plates of Aluminium Alloy Zinc Alumec 89

  PLATES  OF ALUMINIUM ALLOY ZINC ALUMEC-89 PLATES

Application and uses of aluminium plates
Matrix: For Injection
Molds: For Plastic injected.
Molds: For injected rubber, boots and shoes
Molds: For injected items of foam polythene

Molds aluminium plates:
Of embutición deep. To the emptiness.
Molds: For blowing.
Support for plastic molds.
Molds: for extrusion of plástico.
Molds: robotic prototypes.

Properties of aluminium plates
ALUMEC - 89 is a plate of Aluminum with the best mechanical characteristics in the market, which is currently increasing its quality by using 7075-T651 and ALUMEC-79.

Resistence of aluminium plates
* Its resistance is upto 39% superior to Aluminum ALUMEC-79.
* Upto 44% more resistant than Aluminum 7075-T651.
* The elasticity limit is up to 44% superior to Aluminum 7075-T651.
* The conductive thermal is 25% superior than Aluminum 7075-T651.
* Poses a perfect dimensional stability before and after the automated process
* The life span of the plate is uniform which eliminates any soft points or cavities that can be produced.

 

Chemical Composition Aluminium plates
%
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
 
Other
Al
Min.Max
               

 

 
Rest

 

International Equivalencies
USA
SPAIN
FRANCE
GERMANY
G.B
SWEEDEN
SWITZERLAND
CANADA
ITALY
A.A.
 
U.N.E.
 
AFNOR
DIN(1712-1725)
B.S.
S.I.S.
VSM
ALCAN
UNI
                   

 

Mechanical Properties Aluminium plates
STATE
Breaking Point
Rm N/mm2
Elasticicty of Plastic
Rp 0.2 N/mm2
Length
5,65 V So
Resistance of the Shear
N/mm2
Life Span
Brinell(HB)
Vickers
T6
545 - 600
495 - 530
4 - 10
320
179
 
             
             

 

Fisical Properties Aluminium plates
Elastic Number
N/mm2
Actual Weight
gms/cm3
Temperature of Fusion
ºC
Coefficient of dilatac. linear
(20º-100º) 10-6/ºC
Thermal Conductive
w/m ºC
Electrical Resistance
Micro Ohm cm.
Electrical Conductivity
% IACS
Disolve Potential
V.
72.000
2,83
475-630
23

165

5,2

34
-

Headquarters

VALENCIA Pol. Ind. Fuente del Jarro C/Ciudad de Elda, 17-19 46988, Paterna, Valencia broncesval@broncesval.com

Commercial Tel. 96 134 07 76
Fax. 96 134 09 43

Admin. Tel. 96 134 34 21
Fax.96 134 12 28

Delegations

CATALUNYA Pol. Ind. Molí dén Xec Can Barneda, 5  (Junto Baricentro), 08291, Ripollet catalunya@broncesval.com

Tel. 93 565 10 70
Fax. 93 575 39 45

ANDALUCIA Pol. Ind. Calonge C/ Automoción, 1 (Junto Peugeot), 41007, Sevilla andalucia@broncesval.com

Tel. 95 443 06 51
Fax. 95 443 04 29