Plates of Aluminium Alloy Zinc Alumec 79

  PLATES OF ALUMINIUM ALLOY ZINC ALUMEC-79

Application and uses
Matrix: For injection
Molds: For plastic injection
Molds: For rubber injected, shoes and boots.
Molds: For injected. It(He,She) skims off polyethylene, FOAM
Molds: Of embutición deep. On empty.
Molds: Blow/ made by blowing.
Support for plastic molds.
Molds: For extrusion of plastic.
Molds: robotic prototypes.

Properties
High conductive thermal. Thermal conductivity is four times superior to Steel which allows you to work more efficiently and better when it comes to producing plastics or rubber.
Automation of high precision cuts reduce time delays and has an excellent quality with its precised cuts.
Easy to use, the weight of Aluminum is 61% inferior to Steel or 1/3 of its weight which facilitates the manipulation of the metal.
Stable Dimensions, during the production there are two states which are the framework and a strecthed position, which assures the most complete and stable dimension.

Resistance to Corrosion: it´s resistant to all plastics and that is why there is no need to place a crome or nikel finish, even though it is allowed.
SOLDERING has a good attribute which can be soldered to the sistemas of TIG and MIG.
ELECTRO GALVANIZATION It can be crome, nikel and can be gold plated to resist 100% damage from Sodium Chloride.
ANODIZED I LAST the ALUMEC-79 Can be hardened superficially by means of this operation, reaching a superficial hardness of 65 Re.
Application: the resistances of ALUMEC-79 contributes to an increase in life span of the utility of the molds. Thanks to the mechanical characteristics it can be utilized for example: for the same plates of thickness of steel. when creating Aluminum, you must not forget the felixibility of Aluminum, which is three times superior to steel which is aproximated at. 70 KN/mm2 (front aprox. 210 KN/mm2, for steel) at a good temperature. For this reason we must analyze and apply Inertia in the different types of metal plates to limit the effects of the arrows.For this reason it is necessary to analyze and come the case to increase for every case of application.COUPLE(PAR) OF INERTIA of the different plates, to limit the effects of the arrow that can manage to be necessary to use plate that presents a COUPLE OF INERTIA three times mas raised. With everything, the saving weight will be of the order of 50 %.

 

Chemical Properties
%
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
 
Other
Al
Min.Max
0,40
0,50
0,70
0,30
2,60
0,18
0,28
4,30
0,20

Zr + Ti
0,25

0,15
Rest

 

International Equivalencies
USA
SPAIN
FRANCE
GERMANY
G.B
SWEEDEN
SWITZERLAND
CANADA
ITALY
A.A.
 
U.N.E.
 
AFNOR
DIN(1712-1725)
B.S.
S.I.S.
VSM
ALCAN
UNI
                   

 

Mechanical Properties
STATE
Breaking Point
Rm N/mm2
Elasticity Limit
Rp 0.2 N/mm2
Length
5,65 V So
Resistance of the Shear
N/mm2
Life Span
Brinell(HB)
Vickers
T6
450 - 520
390 - 450
10
340
150
 
             
             

 

Fisical Properties
Elastic Model
N/mm2
Specific Weight
gms/cm3
Temperature of Fusion
ºC
Coefficient of dilatac. linear
(20º-100º) 10-6/ºC
Thermal Conductive
w/m ºC
Electrical Resistance
Micro Ohm cm.
Electrical Conductive
% IACS
Potential of dissolution V.
72.000
2,8
475-630
23,5

130

5,2

34
-

 

 

Alloy of aluminium alumec-79 measurements of normalized plates
Thickness
m/m
Size
m/m
Size
m/m
Thickness
m/m
10
1250 x 2500
100
1500 x 3000
12
1250 x 2500
110
1500 x 3000
15
1250 x 2500
120
1500 x 3000
20
1500 x 3000
130
1500 x 3000
25
1250 x 2500
150
1500 x 3000
30
1500 x 3000
180
1500 x 3000
40
1250 x 2500
200
1500 x 3000
50
1500 x 3000
225
1500 x 3000
60
1500 x 3000
250
1500 x 3000
70
1500 x 3000
300
1500 x 3000
80
1500 x 3000
-
-
90
1500 x 3000
-
-

Headquarters

VALENCIA Pol. Ind. Fuente del Jarro C/Ciudad de Elda, 17-19 46988, Paterna, Valencia broncesval@broncesval.com

Commercial Tel. 96 134 07 76
Fax. 96 134 09 43

Admin. Tel. 96 134 34 21
Fax.96 134 12 28

Delegations

CATALUNYA Pol. Ind. Molí dén Xec Can Barneda, 5  (Junto Baricentro), 08291, Ripollet catalunya@broncesval.com

Tel. 93 565 10 70
Fax. 93 575 39 45

ANDALUCIA Pol. Ind. Calonge C/ Automoción, 1 (Junto Peugeot), 41007, Sevilla andalucia@broncesval.com

Tel. 95 443 06 51
Fax. 95 443 04 29